<?xml version="1.0" encoding="utf-8"?>
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" dtd-version="1.4" article-type="research-article">
  <front>
    <journal-meta>
      <journal-id journal-id-type="issn">0536-1036</journal-id>
      <journal-title-group>
        <journal-title xml:lang="ru">Известия высших учебных заведений. Лесной журнал</journal-title>
        <journal-title xml:lang="en">Lesnoy Zhurnal (Forestry Journal)</journal-title>
      </journal-title-group>
      <publisher>
        <publisher-name>M.V. Lomonosov Northern (Arctic) Federal University</publisher-name>
      </publisher>
    </journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.37482/0536-1036-2026-5-141-151</article-id>
      <article-id pub-id-type="uri">https://elibrary.ru/item.asp?id=93584179</article-id>
      <title-group>
        <article-title xml:lang="ru">Технология промышленного производства брикетов из кородревесных отходов осины</article-title>
        <trans-title-group xml:lang="en">
          <trans-title>Industrial Production Procedure of Briquettes from Aspen Bark Waste</trans-title>
        </trans-title-group>
      </title-group>
      <contrib-group>
        <contrib contrib-type="author">
          <name name-style="eastern">
            <surname>Бастриков</surname>
            <given-names>Д.В.</given-names>
          </name>
          <name-alternatives>
            <name name-style="eastern" xml:lang="ru">
              <surname>Бастриков</surname>
              <given-names>Д.В.</given-names>
            </name>
            <name name-style="western" xml:lang="en">
              <surname>Bastrykov</surname>
              <given-names>Dmitry V.</given-names>
            </name>
          </name-alternatives>
          <email>dmitry.bastrikov@alestech.ru</email>
          <contrib-id contrib-id-type="orcid">0009-0008-8192-2299</contrib-id>
          <contrib-id contrib-id-type="researcherid">PKS-0301-2026</contrib-id>
          <xref ref-type="aff" rid="aff1"/>
        </contrib>
        <contrib contrib-type="author">
          <name name-style="eastern">
            <surname>Полянская</surname>
            <given-names>О.А.</given-names>
          </name>
          <name-alternatives>
            <name name-style="eastern" xml:lang="ru">
              <surname>Полянская</surname>
              <given-names>О.А.</given-names>
            </name>
            <name name-style="western" xml:lang="en">
              <surname>Polyanskaya</surname>
              <given-names>Olga A.</given-names>
            </name>
          </name-alternatives>
          <email>polyanskaya_78@mail.ru</email>
          <contrib-id contrib-id-type="orcid">0000-0002-5377-1891</contrib-id>
          <contrib-id contrib-id-type="researcherid">AAH-3386-2021</contrib-id>
          <xref ref-type="aff" rid="aff2"/>
        </contrib>
        <contrib contrib-type="author" corresp="yes">
          <name name-style="eastern">
            <surname>Тамби</surname>
            <given-names>А.А.</given-names>
          </name>
          <name-alternatives>
            <name name-style="eastern" xml:lang="ru">
              <surname>Тамби</surname>
              <given-names>А.А.</given-names>
            </name>
            <name name-style="western" xml:lang="en">
              <surname>Tambi</surname>
              <given-names>Aleksander A.</given-names>
            </name>
          </name-alternatives>
          <email>a_tambi@mail.ru</email>
          <contrib-id contrib-id-type="orcid">0000-0003-4099-3409</contrib-id>
          <contrib-id contrib-id-type="researcherid">J-9614-2017</contrib-id>
          <xref ref-type="aff" rid="aff3"/>
        </contrib>
        <aff-alternatives id="aff1">
          <aff>
            <institution xml:lang="ru">Ассоциация производителей машин и оборудования лесопромышленного комплекса «Лестех» (г. Всеволожск, Россия)</institution>
          </aff>
          <aff>
            <institution xml:lang="en">Association of Manufacturers of Machinery and Equipment for the Timber Industry “Lestech” (Vsevolozhsk, Russia)</institution>
          </aff>
        </aff-alternatives>
        <aff-alternatives id="aff2">
          <aff>
            <institution xml:lang="ru">Санкт-Петербургский государственный лесотехнический университет им. С.М. Кирова (Санкт-Петербург, Россия)</institution>
          </aff>
          <aff>
            <institution xml:lang="en">Saint Petersburg State Forest Technical University (Saint Petersburg, Russia)</institution>
          </aff>
        </aff-alternatives>
        <aff-alternatives id="aff3">
          <aff>
            <institution xml:lang="ru">Санкт-Петербургский филиал Финансового университета при Правительстве Российской Федерации (Санкт-Петербург, Россия)</institution>
          </aff>
          <aff>
            <institution xml:lang="en">Financial University under the Government of the Russian Federation, Saint Petersburg (Saint Petersburg, Russia)</institution>
          </aff>
        </aff-alternatives>
      </contrib-group>
      <pub-date pub-type="epub" iso-8601-date="2026-10-29">
        <day>29</day>
        <month>10</month>
        <year>2026</year>
      </pub-date>
      <pub-date date-type="collection">
        <year>2026</year>
      </pub-date>
      <issue>5</issue>
      <fpage>141</fpage>
      <lpage>151</lpage>
      <history>
        <date date-type="received" iso-8601-date="2026-02-21">
          <day>21</day>
          <month>02</month>
          <year>2026</year>
        </date>
        <date date-type="accepted" iso-8601-date="2026-04-20">
          <day>20</day>
          <month>04</month>
          <year>2026</year>
        </date>
        <date date-type="rev-recd" iso-8601-date="2026-04-18">
          <day>18</day>
          <month>04</month>
          <year>2026</year>
        </date>
      </history>
      <permissions>
        <copyright-statement>© Бастриков Д.В., Полянская О.А., Тамби А.А., 2026</copyright-statement>
        <copyright-year>2026</copyright-year>
        <copyright-holder xml:lang="ru">Бастриков Д.В., Полянская О.А., Тамби А.А.</copyright-holder>
        <copyright-holder xml:lang="en">Bastrykov D.V., Polyanskaya O.A., Tambi A.A.</copyright-holder>
        <license xlink:href="https://creativecommons.org/licenses/by/4.0/">
          <license-p>CC BY 4.0</license-p>
        </license>
      </permissions>
      <self-uri xlink:type="simple" xlink:href="https://elibrary.ru/item.asp?id=93584179">https://elibrary.ru/item.asp?id=93584179</self-uri>
      <abstract xml:lang="ru">
        <p>Исследование посвящено разработке основных параметров технологии переработки кородревесных отходов древесины осины, образующихся при барабанной окорке, в востребованную рынком продукцию – топливные брикеты. Объектом исследования являлись процессы производства топливных брикетов и баланс сырья при производстве топливных брикетов из отходов окорки круглых лесоматериалов из древесины осины. Предметом – брикеты из кородревесных отходов осины. Экспериментальное исследование проведено в условиях действующих производств на промышленном оборудовании. Критерием выбора параметров технологического режима стали требования нормативных документов, регламентирующих свойства древесного биотоплива. Оценка свойств изготовленных брикетов проведена на оборудовании аккредитованной лаборатории. В качестве контрольных видов продукции были изготовлены стандартные брикеты из шлифовальной пыли, образующейся при обработке березовой фанеры, а также брикеты, состоящие на 50 % из кородревесных отходов осины. На основании литературных источников определены требования к фракционному составу древесных частиц в зависимости от применяемой технологии брикетирования. Данные, полученные в результате анализа литературных источников, подтверждены практическими испытаниями. Экспериментально установлено влияние удельного давления прессования кородревесных отходов осины на плотность получаемых брикетов. Определено минимальное давление прессования, обеспечивающее выход брикетов с заданной нормативным документом плотностью. Составлен баланс сырья при производстве топливных брикетов из отходов окорки круглых лесоматериалов и определены основные показатели работы участка по производству брикетов из кородревесных отходов осины. Установлены высшая и низшая теплота сгорания, а также зольность и другие характеристики брикетов из кородревесных отходов осины. В результате разработан новый вид топливного брикета из кородревесных отходов осины и определены его свойства. Область применения итогов научного исследования – процессы эффективной утилизации кородревесных отходов с получением товарной продукции в виде биотоплива.</p>
      </abstract>
      <trans-abstract xml:lang="en">
        <p>This research focuses on developing the key parameters for aspen bark wood waste (generated during drum debarking) conversion into fuel briquettes, which are in demand on the market. The research object was the fuel briquettes production and the raw materials balance in the production of fuel briquettes from aspen round timber bark waste. The research subject was briquettes made of aspen bark waste. The experimental studies were carried out in actual production conditions with industrial equipment. The criteria for selecting process parameters were the requirements of regulatory documents governing the wood biofuel properties. The manufactured briquettes were tested for their properties by the accredited laboratory equipment. Standard briquettes made of grinding dust produced during the birch plywood processing, as well as briquettes consisting of 50 % aspen bark waste, were manufactured as control products. The requirements for the particle size distribution of wood particles have been determined (based on the literature references) depending on the briquetting technology. The data obtained from the literature analysis have been confirmed by empirical testing. Experiments have shown the effect of the specific molding pressure of aspen bark waste on the resulting briquettes density. The minimum molding pressure required to produce briquettes with the density specified in the regulatory document has been determined. A balance of raw materials has been drawn up to produce fuel briquettes from round timber bark waste, and the main performance indicators to produce briquettes from aspen bark waste have been determined. The higher and lower heating values, as well as the ash content and other properties of briquettes made of aspen bark waste, have been determined. As a result, we have developed a new type of fuel briquette made of aspen bark waste, and determined its properties. The scope of scientific research findings is the effective utilization of bark waste to produce marketable biofuel.</p>
      </trans-abstract>
      <kwd-group xml:lang="ru">
        <title>Ключевые слова</title>
        <kwd>кородревесные отходы</kwd>
        <kwd>кородревесные отходы осины</kwd>
        <kwd>производство твердого биотоплива</kwd>
        <kwd>древесные брикеты</kwd>
        <kwd>переработка коры</kwd>
      </kwd-group>
      <kwd-group xml:lang="en">
        <title>Keywords</title>
        <kwd>bark waste</kwd>
        <kwd>aspen bark waste</kwd>
        <kwd>solid biofuel production</kwd>
        <kwd>wood briquettes</kwd>
        <kwd>bark recycling</kwd>
      </kwd-group>
    </article-meta>
  </front>
  <body/>
  <back>
    <ref-list>
      <ref id="ref1">
        <label>1</label>
        <mixed-citation xml:lang="ru">Бастриков Д.В., Власов Ю.Н., Ильюшенко Д.А., Кучер С.В. Экспериментальные исследования энергоемкости дробления отходов окорки сосны // Изв. С.-Петерб. лесотехн. акад. 2017. № 219. С. 193–205.</mixed-citation>
      </ref>
      <ref id="ref2">
        <label>2</label>
        <mixed-citation xml:lang="ru">Бастриков Д.В., Власов Ю.Н., Кучер С.В. Исследование энергоемкости измельчения отходов окорки установкой с ножевым рабочим органом // Лесотехн. журн. 2018. Т. 8, № 1(29). С. 120–128.</mixed-citation>
      </ref>
      <ref id="ref3">
        <label>3</label>
        <mixed-citation xml:lang="ru">Бастриков Д.В., Власов Ю.Н., Кучер С.В., Куницкая Д.Е. Экспериментальные исследования энергоемкости дробления отходов окорки ели // Изв. С.-Петерб. лесотехн. акад. 2016. № 217. С. 81–90.</mixed-citation>
      </ref>
      <ref id="ref4">
        <label>4</label>
        <mixed-citation xml:lang="ru">Бастриков Д.В., Куницкая О.А., Григорьев М.Ф. Исследование процесса измельчения отходов окорки установкой с ножевым рабочим органом // Ремонт. Восстановление. Модернизация. 2019. № 3. С. 21–25.</mixed-citation>
      </ref>
      <ref id="ref5">
        <label>5</label>
        <mixed-citation xml:lang="ru">Власов Ю.Н. Экспериментальные исследования измельчения отходов окорки березы // Системы. Методы. Технологии. 2019. № 1(41). С. 96–100.</mixed-citation>
      </ref>
      <ref id="ref6">
        <label>6</label>
        <mixed-citation xml:lang="ru">Гомонай М.В. Производство топливных брикетов. Древесное сырье, оборудование, технологии, режимы работы: моногр. М.: ГОУ ВПО МГУЛ, 2006. 68 с.</mixed-citation>
      </ref>
      <ref id="ref7">
        <label>7</label>
        <mixed-citation xml:lang="ru">Коршак А.В. Обоснование технологии производства древесных брикетов на прессовом оборудовании ударного типа: автореф. дис. … канд. техн. наук. СПб., 2011. 20 с.</mixed-citation>
      </ref>
      <ref id="ref8">
        <label>8</label>
        <mixed-citation xml:lang="ru">Куницкая О.А., Хитров Е.Г., Илюшенко Д.А. Уплотнение древесных материалов под действием ударной нагрузки // Науч. обозрение. 2012. № 4. С. 121–127.</mixed-citation>
      </ref>
      <ref id="ref9">
        <label>9</label>
        <mixed-citation xml:lang="ru">Малыгин П.В., Любов В.К. Характеристика топливных гранул из различных видов древесных пород // Химия твердого топлива. 2015. № 5. С. 61–69.</mixed-citation>
      </ref>
      <ref id="ref10">
        <label>10</label>
        <mixed-citation xml:lang="ru">Полубояринов О.И., Сорокин А.М. Физические свойства осиновой коры и ее компонентов // Изв. вузов. Лесн. журн. 1992. № 3. С. 67–69.</mixed-citation>
      </ref>
      <ref id="ref11">
        <label>11</label>
        <mixed-citation xml:lang="ru">Помигуев А.В., Куницкая О.А., Григорьев И.В., Тихонов Е.А., Иванов В.А. Обоснование технологии производства и экспериментальные исследования свойств топливных брикетов, предназначенных для использования в условиях лесных терминалов // Системы. Методы. Технологии. 2021. № 1(49). С. 59–66.</mixed-citation>
      </ref>
      <ref id="ref12">
        <label>12</label>
        <mixed-citation xml:lang="ru">Резников С.Н., Павлюкова А.В., Тищенко И.А. Лесопромышленный комплекс России в условиях санкций: внутренний рынок как фактор балансировки экспортных товаропотоков лесной и целлюлозно-бумажной продукции // Экономика устойчивого развития. 2024. № 3(59). С. 235–239.</mixed-citation>
      </ref>
      <ref id="ref13">
        <label>13</label>
        <mixed-citation xml:lang="ru">Уголев Б.Н. Древесиноведение с основами лесного товароведения. 3-е изд., перераб. и доп. М.: МГУЛ, 2001. 340 с.</mixed-citation>
      </ref>
      <ref id="ref14">
        <label>14</label>
        <mixed-citation xml:lang="ru">Чибирев О.В., Власов Ю.Н., Бастриков Д.В. Аппроксимированные зависимости для расчета теплотворной способности коры по абсолютной влажности // Актуальн. направления науч. исследований XXI в.: теория и практика. 2016. Т. 4, № 1(21). С. 108–111.</mixed-citation>
      </ref>
      <ref id="ref15">
        <label>15</label>
        <mixed-citation xml:lang="ru">Чибирев О.В., Кацадзе В.А., Власов Ю.Н., Кучер С.В. Топливные брикеты из отходов лесопереработки // Леса России: политика, промышленность, наука, образование: материалы Второй Междунар. науч.-техн. конф. СПб.: С.-Петерб. гос. лесотехн. ун-т им. С.М. Кирова, 2017. С. 46–48.</mixed-citation>
      </ref>
      <ref id="ref16">
        <label>16</label>
        <mixed-citation xml:lang="ru">Чибирев О.В., Кацадзе В.А., Власов Ю.Н., Кучер С.В. Современное прессовое оборудование для брикетирования древесных отходов // Леса России: политика, промышленность, наука, образование: материалы Второй Междунар. науч.-техн. конф. СПб.: С.-Петерб. гос. лесотехн. ун-т им. С.М. Кирова, 2017. С. 48–51.</mixed-citation>
      </ref>
      <ref id="ref17">
        <label>17</label>
        <mixed-citation xml:lang="ru">Чибирев О.В., Куницкая О.А., Григорьев М.Ф. Расчет потребного давления прессования опилок при формировании брикета // Ремонт. Восстановление. Модернизация. 2019. № 2. С. 22–25.</mixed-citation>
      </ref>
      <ref id="ref18">
        <label>18</label>
        <mixed-citation xml:lang="ru">DIN 51731-1996. Testing of Solid Fuels – Compressed Untreated Wood, Requirements and Testing (SN 166000). Winterthur, Schweizerische Normen-Vereinigung, 2001. 4 p. (In German).</mixed-citation>
      </ref>
      <ref id="ref19">
        <label>19</label>
        <mixed-citation xml:lang="ru">Hodolic J., Vukelic Dj., Agarski B., Hudjik C. Briquetting of Biomass and Environmental Engineering. Proceedings – Quality Festival 2007 – 2. Conference about Quality of Life. Kragujevac, Center for Quality, Faculty for Mechanical Engineering, 2007, pp. 8–11.</mixed-citation>
      </ref>
      <ref id="ref20">
        <label>20</label>
        <mixed-citation xml:lang="ru">Jha P., Yadav P. Briquetting of Saw Dust. Applied Mechanics and Materials, 2011, vol. 110-116, pp. 1758–1761. https://doi.org/10.4028/www.scientific.net/AMM.110-116.1758</mixed-citation>
      </ref>
      <ref id="ref21">
        <label>21</label>
        <mixed-citation xml:lang="ru">Križan P., Šooš L., Matúš M., Svátek M., Vukelić D. Evaluation of Measured Data from Research of Parameters Impact on Final Briquettes Density. APLIMAT – Journal of Applied Mathematics, 2010, vol. 3, pp. 68–76.</mixed-citation>
      </ref>
      <ref id="ref22">
        <label>22</label>
        <mixed-citation xml:lang="ru">Samuelsson R., Thyrel M., Sjöström M., Lestander T.A. Effect of Biomaterial Characteristics on Pelletizing Properties and Biofuel Pellet Quality. Fuel Processing Technology, 2009, vol. 90, iss. 9, pp. 1129–1134. https://doi.org/10.1016/j.fuproc.2009.05.007</mixed-citation>
      </ref>
      <ref id="ref23">
        <label>23</label>
        <mixed-citation xml:lang="ru">Ståhl M., Granström K., Berghel J., Renström R. Industrial Processes for Biomass Drying and Their Effects on the Quality Properties of Wood Pellets. Biomass and Bioenergy, 2004, vol. 27, iss. 6, pp. 621–628. https://doi.org/10.1016/j.biombioe.2003.08.019</mixed-citation>
      </ref>
      <ref id="ref24">
        <label>24</label>
        <mixed-citation xml:lang="en">Bastrikov D.V., Vlasov Yu.N., Iljushenko D.A., Kucher S.V. Experimental Studies of Energy Consumption of Pine Debarking Wastes Shredding. Izvestia Sankt-Peterburgskoj Lesotehniceskoj Akademii, 2017, no. 219, pp. 193–205. (In Russ.). https://doi.org/10.21266/2079-4304.2017.219.193-205</mixed-citation>
      </ref>
      <ref id="ref25">
        <label>25</label>
        <mixed-citation xml:lang="en">Bastrikov D.V., Vlasov Yu.N., Kucher S.V. Investigation of the Energy Consumption of Barking Waste Grinding by Installation with a Knife Working Body. Forestry Engineering Journal, 2018, vol. 8, no. 1(29), pp. 120–128. (In Russ.). https://doi.org/10.12737/article_5ab0dfc1384de4.17339793</mixed-citation>
      </ref>
      <ref id="ref26">
        <label>26</label>
        <mixed-citation xml:lang="en">Bastrikov D.V., Vlasov Yu.N., Kucher S.V., Kunitskaya D.E. Experimental Studies of Energy Consumption of Debarking Wastes Shredding. Izvestia Sankt-Peterburgskoj Lesotehniceskoj Akademii, 2016, no. 217, pp. 81–90. (In Russ.). https://doi.org/10.21266/2079-4304.2016.217.81-90</mixed-citation>
      </ref>
      <ref id="ref27">
        <label>27</label>
        <mixed-citation xml:lang="en">Bastrikov D.V., Kunitskaya O.A., Grigoryev M.F. Study of Debarking-Waste Shredding by Knifed Shredding Machine. Remont, Vosstanovlenie, Modernizatsiya = Repair, Reconditioning, Modernization, 2019, no. 3, pp. 21–25. (In Russ.). https://doi.org/10.31044/1684-2561-2019-0-3-21-25</mixed-citation>
      </ref>
      <ref id="ref28">
        <label>28</label>
        <mixed-citation xml:lang="en">Vlasov Yu.N. Experimental Studies of Birch Barking Waste Shredding. Systems. Methods. Technologies, 2019, no. 1(41), pp. 96–100. (In Russ.). https://doi.org/10.18324/2077-5415-2019-1-96-100</mixed-citation>
      </ref>
      <ref id="ref29">
        <label>29</label>
        <mixed-citation xml:lang="en">Gomonai M.V. Production of Fuel Briquettes. Wood Raw Materials, Equipment, Technologies, and Operation Modes: Monograph. Moscow, MGUL Publ., 2006. 68 p. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref30">
        <label>30</label>
        <mixed-citation xml:lang="en">Korshak A.V. Technology Substantiation for Wood Briquettes Production Using Impact-Type Pressure Equipment: Cand. Engin. Sci, Diss, Abs. Saint Petersburg, 2011. 20 p. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref31">
        <label>31</label>
        <mixed-citation xml:lang="en">Kunitskaya O.A., Khitrov E.G., Ilyushenko D.A. Compaction of Timber under Impact Load. Science Review, 2012, no. 4, pp. 121–127. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref32">
        <label>32</label>
        <mixed-citation xml:lang="en">Malygin P.V., Lyubov V.K. Characteristics of Fuel Granules from Different Wood Species. Khimiya tverdogo topliva = Solid Fuel Chemistry, 2015, no. 5, pp. 61–69. (In Russ.). https://doi.org/10.7868/S0023117715050084</mixed-citation>
      </ref>
      <ref id="ref33">
        <label>33</label>
        <mixed-citation xml:lang="en">Poluboyarinov O.I., Sorokin A.M. Physical Properties of Aspen Bark and Its Components. Lesnoy Zhurnal = Russian Forestry Journal, 1992, no. 3, pp. 67–69. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref34">
        <label>34</label>
        <mixed-citation xml:lang="en">Pomiguev A.V., Kunitskaya O.A., Grigorjev I.V., Tikhonov E.A., Ivanov V.A. Justification of the Production Technology and Experimental Studies of the Properties of Fuel Briquettes Intended for Use in the Conditions of Forest Terminals. Systems. Methods. Technologies, 2021, no. 1(49), pp. 59–66. (In Russ.). https://doi.org/10.18324/2077-5415-2021-1-59-66</mixed-citation>
      </ref>
      <ref id="ref35">
        <label>35</label>
        <mixed-citation xml:lang="en">Reznikov S.N., Pavlyukova A.V., Tishchenko I.A. The Russian Forest Industry Complex under Sanctions: The Domestic Market as a Factor in Balancing Export Commodity Flows of Forest and Pulp and Paper Products. Economics of Sustainable Development, 2024, no. 3(59), pp. 235–239. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref36">
        <label>36</label>
        <mixed-citation xml:lang="en">Ugolev B.N. Wood Science with the Basics of Forest Commodity Science. Moscow, MGUL Publ., 2001. 340 p. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref37">
        <label>37</label>
        <mixed-citation xml:lang="en">Chibirev O.V., Vlasov Yu.N., Bastrikov D.V. Dependencies to Evaluate Heat of Combustion of Bark Regarding Its Absolute Humidity. Aktual’nye napravlenia naucnyh issledovanij XXI veka: teoria i praktika, 2016, vol. 4, no. 1(21), pp. 108–111. (In Russ.). https://doi.org/10.12737/19267</mixed-citation>
      </ref>
      <ref id="ref38">
        <label>38</label>
        <mixed-citation xml:lang="en">Chibirev O.V., Katsadze V.A., Vlasov Yu.N., Kucher S.V. Fuel Briquettes from Wood Processing Waste. Forests of Russia: Policy, Industry, Science, and Education: Proceedings of the 2nd International Scientific and Technical Conference. Saint Petersburg, SPbSFTU Publ., 2017, pp. 46–48. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref39">
        <label>39</label>
        <mixed-citation xml:lang="en">Chibirev O.V., Katsadze V.A., Vlasov Yu.N., Kucher S.V. Modern Press Equipment for Wood Waste Briquetting. Forests of Russia: Policy, Industry, Science, and Education: Proceedings of the 2nd International Scientific and Technical Conference. Saint Petersburg, SPbSFTU Publ., 2017, pp. 48–51. (In Russ.).</mixed-citation>
      </ref>
      <ref id="ref40">
        <label>40</label>
        <mixed-citation xml:lang="en">Chibirev O.V., Kunitskaya O.A., Grigorev M.F. Calculation of Needed Pressure for Sawdust Pressing during Briquetting. Remont, Vosstanovlenie, Modernizatsiya = Repair, Reconditioning, Modernization, 2019, no. 2, pp. 22–25. (In Russ.). https://doi.org/10.31044/1684-2561-2019-0-2-22-25</mixed-citation>
      </ref>
      <ref id="ref41">
        <label>41</label>
        <mixed-citation xml:lang="en">DIN 51731-1996. Testing of Solid Fuels – Compressed Untreated Wood, Requirements and Testing (SN 166000). Winterthur, Schweizerische Normen-Vereinigung, 2001. 4 p. (In German).</mixed-citation>
      </ref>
      <ref id="ref42">
        <label>42</label>
        <mixed-citation xml:lang="en">Hodolic J., Vukelic Dj., Agarski B., Hudjik C. Briquetting of Biomass and Environmental Engineering. Proceedings – Quality Festival 2007 – 2. Conference about Quality of Life. Kragujevac, Center for Quality, Faculty for Mechanical Engineering, 2007, pp. 8–11.</mixed-citation>
      </ref>
      <ref id="ref43">
        <label>43</label>
        <mixed-citation xml:lang="en">Jha P., Yadav P. Briquetting of Saw Dust. Applied Mechanics and Materials, 2011, vol. 110-116, pp. 1758–1761. https://doi.org/10.4028/www.scientific.net/AMM.110-116.1758</mixed-citation>
      </ref>
      <ref id="ref44">
        <label>44</label>
        <mixed-citation xml:lang="en">Križan P., Šooš L., Matúš M., Svátek M., Vukelić D. Evaluation of Measured Data from Research of Parameters Impact on Final Briquettes Density. APLIMAT – Journal of Applied Mathematics, 2010, vol. 3, pp. 68–76.</mixed-citation>
      </ref>
      <ref id="ref45">
        <label>45</label>
        <mixed-citation xml:lang="en">Samuelsson R., Thyrel M., Sjöström M., Lestander T.A. Effect of Biomaterial Characteristics on Pelletizing Properties and Biofuel Pellet Quality. Fuel Processing Technology, 2009, vol. 90, iss. 9, pp. 1129–1134. https://doi.org/10.1016/j.fuproc.2009.05.007</mixed-citation>
      </ref>
      <ref id="ref46">
        <label>46</label>
        <mixed-citation xml:lang="en">Ståhl M., Granström K., Berghel J., Renström R. Industrial Processes for Biomass Drying and Their Effects on the Quality Properties of Wood Pellets. Biomass and Bioenergy, 2004, vol. 27, iss. 6, pp. 621–628. https://doi.org/10.1016/j.biombioe.2003.08.019</mixed-citation>
      </ref>
    </ref-list>
  </back>
</article>
