The Use of Logging Machinery Sets in the Republic of Bashkortostan

Authors

DOI:

https://doi.org/10.37482/0536-1036-2022-3-139-152

Keywords:

logging operations, logging machinery sets, harvesting, harvester, forwarder, organization of machine operation, machine set performance

Abstract

The disintegration of the integrated logging enterprises, as well as of the forestry enterprises and the reduced attention of the authorities to the production of specialized machinery and equipment, the logging production process, have led to a decline in the equipment of the logging enterprises with specialized machinery and the effective organization of their operation. Small, privately owned, poorly equipped with machinery logging companies have emerged. Practically we reverted to the technology of the 1960s. Foreign chainsaws are used for felling, delimbing and crosscutting. The skidding operation practically uses general-purpose tractors of МТЗ-80(82) type with the simplest technological equipment – a set of chokers. Some of the larger companies use foreign harvesters and forwarders. According to our research, forestry farms of the Republic of Bashkortostan are in a similar position. In order to increase the level of equipment and improve the organization of its work at the enterprises of the Republic of Bashkortostan we have considered and proposed for use a number of machinery sets. However, practice shows that it is not enough to acquire and equip the production with modern machinery and equipment. A production process must be set up to ensure the effective operation of these machines. Logging as a complex, multi-operated, discrete process can be carried out using a variety of technologies. The most common technology nowadays is the logging and hauling of assortments, for which various harvesting machines and equipment can be used. For the effective operation, harvesting machines performing individual operations are combined into machinery sets. However, current practice shows that it is not possible to match machines and equipment with the same or slightly different capacities. Therefore, the output of such sets is usually equal to, or even lower than, the output of the operation with the lowest capacity. In order to increase the output of the machinery set to the output of the leading machine (the machine with the highest capacity), it is necessary to calculate the modes of operation of machines for specific operating conditions. There are five sets of logging machines offered. The costs that the use of each of them will require are calculated. On the basis of the obtained data it is concluded that in the conditions of the Republic of Bashkortostan it is most economically feasible to use the following set: chainsaw for felling, choker tractor for skidding, two chainsaws for delimbing and crosscutting, lumber carrier for hauling.

Downloads

Download data is not yet available.

Author Biographies

Anatoliy N. Zaikin, Bryansk State Engineering and Technology University

Doctor of Engineering, Prof.

Vladimir V. Sivakov, Bryansk State Engineering and Technology University

Candidate of Engineering, Assoc. Prof.; ResearcherID: R-7264-2019

Nikolay A. Bulkhov, Bryansk State Engineering and Technology University

Candidate of Economics, Assoc. Prof.

Svetlana A. Konshakova, Bryansk State Engineering and Technology University

Candidate of Economics, Assoc. Prof.

Sergey G. Kuznetsov, Bryansk State Engineering and Technology University

Candidate of Economics, Assoc. Prof.

References

Денисов С.А., Торопов А.С., Микрюкова Е.В., Волкова Л.П., Шарапов Е.С., Тетерина М.А., Ефимов Ю.В., Мартынов А.М., Романов Э.Г. Обоснование ресурсосберегающих технологий лесопромышленного комплекса, адаптированных к природным условиям Пермского края, с минимизацией затрат на лесовосстановление: отчет о НИР/НИОК Р (заключительный) / ГОУ ВПО Марийский государственный технический университет; рук. С.Б. Якимович. Грант № 6.6-29/2 от 03.08.2007. Государственная регистрация № 2007-01.29. Йошкар-Ола, 2007. 500 с. Denisov S.A., Toropov A.S., Mikryukova E.V., Volkova L.P., Sharapov E.S., Teterina M.A., Efimov Yu.V., Martynov A.M., Romanov E.G. Justification of Resource-Saving Technologies of the Timber Industry, Adapted to the Natural Conditions of Perm Krai, with Cost Minimization for Reforestation: Research/Research and Development Report (Final). Mari State Technical University. Supervisor S.B. Yakimovich. Grant No. 6.6-29/2 Dated August 3, 2007. State registration No. 2007-01.29. Yoshkar-Ola, Publ., 2007. 500 p.

Заикин А.Н. Моделирование режимов работы лесосечных машин // Изв. вузов. Лесн. журн. 2009. № 1. С. 71–77. Zaikin A.N. Simulation of Logging Machines Operation Modes. Lesnoy Zhurnal = Russian Forestry Journal, 2009, no. 1, pp. 71–77. http://lesnoizhurnal.ru/upload/iblock/27d/27d123e35cbb74f7f17b1974f6f195da.pdf

Заикин А.Н. Математическое моделирование режимов работы лесосечных машин и анализ изменения объемов оперативных запасов // Вестн. МГУЛ – Лесн. вестн. 2010. № 1. С. 69–76. Zaikin A.N. Designing of Operation Modes of Logging Machines. Lesnoy vestnik = Forestry Bulletin, 2010, no. 1, pp. 69–76.

Заикин А.Н. Математические модели расчета режимов работы лесосечных машин // В мире научных открытий. 2010. № 4-13(10). С. 126–130. Zaikin A.N. Mathematical Models for Calculating the Operating Modes of Logging Machines. Siberian Journal of Life Sciences and Agriculture, 2010, no. 4-13(10), pp. 126–130.

Заикин А.Н. Типы и назначение запасов древесины в производственном процессе лесозаготовок // Изв. вузов. Лесн. журн. 2013. № 3. С. 71–78. Zaikin A.N. The Types and Purpose of Timber Stocks in the Process of Timber Production. Lesnoy Zhurnal = Russian Forestry Journal, 2013, no. 3, pp. 71–78. http://lesnoizhurnal.ru/upload/iblock/d4f/le2.pdf

Заикин А.Н., Рыжикова Е.Г., Теремкова И.И. Метод оперативного планирования и управления лесосечными работами // Изв. вузов. Лесн. журн. 2017. № 2. С. 107–118. Zaikin A.N., Ryzhikova E.G., Teremkova I.I. Method of Operational Planning and Control of Logging Operations. Lesnoy Zhurnal = Russian Forestry Journal, 2017, no. 2, pp. 107–118. https://doi.org/10.17238/issn0536-1036.2017.2.107

Заикин А.Н., Коньшакова С.А., Сиваков В.В., Кузнецов С.Г., Булхов Н.А. Технологический ресурс лесозаготовительной техники лесхозов Республики Башкортостан // Изв. вузов. Лесн. журн. 2020. № 4. С. 123–133. Zaikin A.N., Konshakova S.A., Sivakov V.V., Kuznetsov S.G., Bulkhov N.A. Technological Resources of Harvesting and Logging Machinery of Bashkortostan Forestries. Lesnoy Zhurnal = Russian Forestry Journal, 2020, no. 4, pp. 123–133. https://doi.org/10.37482/0536-1036-2020-4-123-133

Климушев Н.К. Методы и модели управления запасами лесоматериалов: моногр. Ухта: УГТУ , 2001. 76 с. Klimushev N.K. Methods and Models of Timber Stock Management: Monograph. Ukhta, USTU Publ., 2001. 76 p.

Климушев Н.К. Управление запасами лесоматериалов: моногр. М.: МГУЛ , 2005. 187 с. Klimushev N.K. Management of Timber Stocks: Monograph. Moscow, MGUL Publ., 2005. 187 p.

Ле Ан Туан, Смирнова А.И. Экономические подходы к обоснованию технологии лесозаготовок в лесопромышленном холдинге // Изв. вузов. Лесн. журн. 2001. № 5–6. С. 170–174. Le An Tuan, Smirnova A.I. Economic Approaches to Harvesting Technologies Substantiation in Forest Industrial Holding Company. Lesnoy Zhurnal = Russian Forestry Journal, 2001, no. 5-6, pp. 170–174. http://lesnoizhurnal.ru/upload/iblock/e24/e24ee1b43b9cd-52e8c6d87c1e855e3f0.pdf

Лесной план Республики Башкортостан. Кн. 1. Пояснительная записка: утв. Указом Главы Республики Башкортостан от 27.12.18 № УГ-76С. Уфа, 2018. 337 с. Forest Plan of the Republic of Bashkortostan. Book 1. Explanatory Note: Approved by the Decree of the Head of the Republic of Bashkortostan Dated December 27, 2018, No. УГ-76С. Ufa, 2018. 337 p.

Мохирев А.П., Горяева Е.В., Медведев С.О. Оценка технологических процессов лесозаготовительных предприятий // Лесотехн. журн. 2016. Т. 6, № 4(24). С. 139–147. Mokhirev A.P., Goryaeva E.V., Medvedev S.O. Estimation of Technological Processes of Logging Enterprises. Forestry Engineering Journal, 2016, vol. 6, no. 4(24), pp. 139–147. https://doi.org/10.12737/23448

Рукомойников К.П., Мохирев А.П. Обоснование технологической схемы лесозаготовительных работ путем создания динамической модели функционирования предприятия // Изв. вузов. Лесн. журн. 2019. № 4. С. 94–107. Rukomojnikov K.P., Mokhirev A.P. Validation of the Logging Operations Scheme through the Creation of Dynamical Model of the Enterprise Functioning. Lesnoy Zhurnal = Russian Forestry Journal, 2019, no. 4, pp. 94–107. https://doi.org/10.17238/issn05361036.2019.4.94

Шегельман И.Р., Скрыпник В.И., Кузнецов А.В. Анализ показателей работы и оценка эффективности лесозаготовительных машин в различных природно-производственных условиях // Уч. зап. ПетрГУ. Сер.: Естеств. и техн. науки. 2010. № 4(109). C. 66–75. Shegelman I.R., Skrypnik V.I., Kuznecov A.V. Harvesting Machines Performance Analysis and Evaluation of Their Effectiveness in Various Working Environments. Proceedings of Petrozavodsk State University. Series: Natural & Engineering Sciences, 2010, no. 4(109), pp. 66–75.

Шегельман И.Р., Щеголева Л.В., Пономарев А.Ю. Математическая модель выбора сквозных потоков заготовки, транспортировки и переработки древесного сырья // Изв. СП бЛТА . 2005. № 172. С. 32–37. Shegelman I.R., Shchegoleva L.V., Ponomarev A.Yu. Mathematical Model of the Choice of Through Flows of Procurement, Transportation and Processing of Wood Raw Materials. Izvestia Sankt-Peterburgskoj lesotehniceskoj akademii, 2005, no. 172, pp. 32–37.

Якимович С.Б., Володина И.Ю. Формирование комплектов машин лесозаготовок на основе распределения состояний предмета труда по маршруту технологического процесса // Лесн. вестн. 2001. № 2. С. 128–136. Yakimovich S.B., Volodin I.Yu. Formation of Sets of Logging Machines Based on the State Distribution of the Subject of Labor along the Technological Process Route. Lesnoy vestnik = Forestry Bulletin, 2001, no. 2, pp. 128–136.

Якимович С.Б., Тетерина М.А. Классификация обрабатывающих транспортных систем заготовки и первичной обработки древесины // Вестн. МГУЛ – Лесн. вестн. 2009. № 2. С. 67–73. Yakimovich S.B., Teterina M.A. Classification of Wood Harvesting and Primary Processing Processing-Transporting Systems. Lesnoy vestnik = Forestry Bulletin, 2009, no. 2, pp. 67–73.

Carlsson D., D’Amours S., Martel A., Rönnqvist M. Decisions and Methodology for Planning the Wood Fiber Flow in the Forest Supply Chain. Recent Developments in Supply Chain Management. Ed by R. Koster, W. Delfmann. Helsinki, University Press, 2008, pp. 11–39.

Henningsson M., Karlsson J., Rönnqvist M. Optimization Models for Forest Road Upgrade Planning. Journal of Mathematical Modelling and Algorithms, 2007, vol. 6, iss. 1, pp. 3–23. https://doi.org/10.1007/s10852-006-9047-0

Luce Ch.H. Effectiveness of Road Ripping in Restoring Infiltration Capacity of Forest Roads. Restoration Ecology, 1997, vol. 5, iss. 3, pp. 265–270. https://doi.org/10.1046/j.1526-100X.1997.09731.x

Medvedev S., Mokhirev A., Rjabova T. Methodical Approach to Increase Efficiency of Use of Wood Resource Potential of the Region. IOP Conference Series: Earth and Environmental Science, 2019, vol. 316, art. 012036. https://doi.org/10.1088/1755-1315/316/1/012036

Mokhirev A., Gerasimova M., Pozdnyakova M. Finding the Optimal Route of Wood Transportation. IOP Conference Series: Earth and Environmental Science, 2019, vol. 226, art. 012053. https://doi.org/10.1088/1755-1315/226/1/012053

Pentek T., Nevečerel H., Ecimović T., Lepoglavec K., Papa I., Tomašić Z. Strategijsko planiranje šumskih prometnica u Republici Hrvatskoj – raščlamba postojećega stanja kao podloga za buduće aktivnosti. Nova Mehanizacija Šumarstva, 2014, vol. 35, no. 1, pp. 63–78. (In Croat.).

Rukomojnikov K.P. Structuring of Loading Points and Main Skid Road in Conditions of Existing Road Network in Forest Compartment. Journal of Applied Engineering Science, 2015, vol. 13, no. 3, pp. 167–174. DOI: https://doi.org/10.5937/jaes13-8866

Trømborg E., Sjølie H., Solberg B., Hovi I.B., Madslien A., Veisten K. Economic and Environmental Impacts of Transport Cost Changes on Timber and Forest Product Markets in Norway. Scandinavian Journal of Forest Research, 2009, vol. 24, iss. 4, pp. 354–366. https://doi.org/10.1080/02827580903035994

Zaikin A.N., Mukovnina M.V., Nikitin V.V., Scherbakov E.N. Reducing Industrial Impact on Forest Ecosystems by Improving the Organization of Harvesting Operations. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 2018, vol. 11(60), no. 1, pp. 69–76.

Zyryanov M., Medvedev S., Mokhirev A. Study of the Possibility of Using Logging Residue for the Production of Wood Processing Enterprises. Journal of Applied Engineering Science, 2020, vol. 18, no. 1, pp. 15–18. https://doi.org/10.5937/jaes18-22611

Published

2022-06-08

How to Cite

Zaikin А. ., Sivakov В. ., Bulkhov Н. ., Konshakova С. ., and Kuznetsov С. . “The Use of Logging Machinery Sets in the Republic of Bashkortostan”. Lesnoy Zhurnal (Forestry Journal), no. 3, June 2022, pp. 139-52, doi:10.37482/0536-1036-2022-3-139-152.