Plywood and Thermal Insulation Boards Based on the Modified Phenol Formaldehyde Binder
DOI:
https://doi.org/10.37482/0536-1036-2022-1-155-165Keywords:
FSF plywood, phenol formaldehyde binder, hydrogen peroxide, physical and mechanical properties, thermal insulation boards, cellulose-containing waste, flax spinning wasteAbstract
The lower curing temperature of phenol formaldehyde binder allows reducing the costs of producing cellulose-containing materials, such as FSF plywood and thermal insulation composites made of plant wastes. However, the low-temperature production mode provides an insufficient degree of the phenol formaldehyde binder curing, leading to a decrease in water resistance of material based on the phenol formaldehyde binder. A modifier should be added to the phenol formaldehyde binder to reduce the amount of free hydroxymethylol groups in the cured binder and to form a stronger cross-linked structure in low-temperature curing conditions. Hydrogen peroxide was used as a phenol formaldehyde binder modifier in this research. The research results confirmed the hypothesis about the effect of hydrogen peroxide on the intensification of the structure formation of cellulose-containing materials based on the phenol formaldehyde binder. In conditions of low-temperature curing (120 °C for FSF plywood and 100 °C for thermal insulation composites made of plant wastes) modification of phenol formaldehyde binder with hydrogen peroxide reduced the binder curing time, the pressing time of FSF plywood, improved the physical and mechanical properties of FSF plywood and thermal insulation composites made of cellulose-containing filler (soft wood waste and irrecoverable flax spinning waste). When 1.0 % of hydrogen peroxide is added to the binder, the binder curing time reduces by 43.6 %. The addition of 1.0 % of hydrogen peroxide increased the shear strength of FSF plywood by 4.4 % and the static bending strength of plywood by 4.8 %. Modification of the binder with hydrogen peroxide increased water resistance of FSF plywood: plywood thickness swelling has been reduced by 2 % over 24 h in water. The strength of thermal insulation composites made of cellulose-containing wastes increased by 5.2 % with the addition of 1.0 % of hydrogen peroxide, thickness swelling decreased by 4.9 % over 24 h. The obtained research results allow recommending a modifying additive of hydrogen peroxide to phenol formaldehyde binder in an amount of 1.0 % of resin mass to increase the strength properties of FSF plywood and thermal insulation composites made of plant wastes.
For citation: Vakhnina T.N., Fedotov A.A., Susoeva I.V., Rumyantseva V.E. Plywood and Thermal Insulation Boards Based on the Modified Phenol Formaldehyde Binder. Lesnoy Zhurnal [Russian Forestry Journal], 2022, no. 1, pp. 155–165. DOI: 10.37482/0536-1036-2022-1-155-165
Downloads
References
Asim M., Saba N., Jawaid M., Nasir M. A Review on Phenolic Resin and Its Composites. Current Analytical Chemistry, 2017, vol. 14, no. 3, pp. 185–197. DOI: https://doi.org/10.2174/1573411013666171003154410
Azarov V.I., Burov A.V., Obolenskaya A.V. Chemistry of Wood and Synthetic Polymers. Saint Petersburg, Lan’ Publ., 2021. 624 p.
Czarnecki R., Łȩcka J. H2O2 as a Modifier of Phenol–Formaldehyde Resin Used in the Production of Particleboards. Journal of Applied Polymer Science, 2003, vol. 88, iss. 14, pp. 3084–3092. DOI: https://doi.org/10.1002/app.11962
Dziurka D., Łȩcka J., Mirski R. The Effect of Modification of Phenolic Resin with Alkylresorcinols and H2O2 on Properties of Plywood. Acta Scientiarum Polonorum. Silvarum Colendarum Ratio et Industria Lignaria, 2009, vol. 8, iss. 4, pp. 67–74.
Englund K. Tribology of Natural Fiber Polymer Composites. Materials Today, 2009, vol. 12, iss. 3, p. 45. DOI: https://doi.org/10.1016/S1369-7021(09)70093-8
Gardziella A., Pilato L.A., Knop A. Phenolic Resins. New York, Springer, 2000. 566 p. DOI: https://doi.org/10.1007/978-3-662-04101-7
Golova L.K., Makarov I.S., Matukhina E.V., Kulichikhin V.G. Solutions of Cellulose and Its Blends with Synthetic Polymers in N-methylmorpholine-N-oxide: Preparation, Phase State, Structure, and Properties. Polymer Science, Series A, 2010, vol. 52, iss. 11, pp. 1209–1219. DOI: https://doi.org/10.1134/S0965545X10110155
Guo L.,Wang L., Li J. Study on Modification of Phenol Formaldehyde Resin Adhesive with Ionic Liquid. Proceedings of the 2nd International Conference on Electronic & Mechanical Engineering and Information Technology (EMEIT 2012). Atlantis Press, 2012, pp. 1910–1913. DOI: https://doi.org/10.2991/emeit.2012.422
Hoong Y.B., Paridah M.T., Loh Y.F., Koh M.P., Luqman C.A., Zaidon A. Acacia mangium Tannin as Formaldehyde Scavenger for Low Molecular Weight Phenol-Formaldehyde Resin in Bonding Tropical Plywood. Journal of Adhesion Science and Technology, 2010, vol. 24, iss. 8-10, pp. 1653–1664. DOI: https://doi.org/10.1163/016942410X507740
Krutov S.M., Evtuguin D.V., Ipatova E.V., Santos S.A.O., Sazanov Yu.N. Modification of Acid Hydrolysis Lignin for Value-Added Applications by Micronization Followed by Hydrothermal Alkaline Treatment. Holzforschung, 2015, vol. 69, no. 6, pp. 761–768. DOI: https://doi.org/10.1515/hf-2014-0264
Kuznetsov B.N., Sudakova I.G., Garyntseva N.V., Djakovitch L., Pinel C. Kinetic Studies and Optimization of Abies Wood Fractionation by Hydrogen Peroxide under Mild Conditions with TiO2 Catalyst. Reaction Kinetics, Mechanisms and Catalysis, 2016, vol. 120, iss. 1, pp. 81–94. DOI: https://doi.org/10.1007/s11144-016-1100-z
Mansouri N.E.E., Yuan Q., Huang F. Preparation and Characterization of Phenol-Formaldehyde Resins Modified with Alkaline Rice Straw Lignin. BioResources, 2018, vol. 13, no. 4, pp. 8061–8075. DOI: http://dx.doi.org/10.15376/biores.13.4.8061-8075
Royter V.A. Catalytic Properties of Substances. Kiev, Naukova Dumka Publ., 1968. 1464 p.
Sandberg D., Kutnar A., Mantanis G. Wood Modification Technologies – A Review. iForest – Biogeosciences and Forestry, 2017, vol. 10, iss. 6, pp. 895–908. DOI: https://doi.org/10.3832/ifor2380-010
Sedliačik J., Bekhta P., Potapova O. Technology of Low-Temperature Production of Plywood Bonded with Modified Phenol-Formaldehyde Resin. Wood research, 2010, vol. 55, iss. 4, pp. 123–130.
Shiraishi Y., Hagi T., Tanaka S., Ichikawa S., Hirai T. Solar-to-Hydrogen Peroxide Energy Conversion on Resorcinol–Formaldehyde Resin Photocatalysts Prepared by Acid-Catalysed Polycondensation. Communications Chemistry, 2020, vol. 3, art. 169. DOI: https://doi.org/10.1038/s42004-020-00421-x
Shnawa H.A., Ibraheem I.K., Shenta A.A. Kinetic Study of Curing Phenol-Formaldehyde/Tannin-Formaldehyde Composite Resins. Natural Resources, 2015, vol. 6, no. 10, pp. 503–513. DOI: https://doi.org/10.4236/nr.2015.610048
Susoeva I.V., Vakhnina T.N. Unused Plant Waste and Thermal Insulating Composition Boards on Their Basis. Izvestiya vysshikh uchebnykh zavedeniy. Stroitel’stvo [News of higher educational institutions. Construction], 2019, no. 7, pp. 49–59. DOI: https://doi.org/10.32683/0536-1052-2019-727-7-49-59
Vakhnina T.N., Fedotov A.A., Titunin A.A., Susoeva I.V. Influence of Modifiers on the Curing Time of the Phenol Formaldehyde Binder for Pressing Panels at Low Temperature Mode. Lesotekhnicheskiy zhurnal [Forestry Engineering Journal], 2019, no. 4(36), pp. 99–108. DOI: https://doi.org/10.34220/issn.2222-7962/2019.4/11
Valyova M., Ivanova Y. Modified Phenol – Phormaldehyde Resins Used for Plywood Gluing. International Journal – Wood, Design & Technology, 2015, vol. 4, no. 1, pp. 35–48.
Vershal V.V., Medvedeva E.N., Rybalchenko N.A., Babkin V.A. Study of Decomposition of Hydrogen Peroxide in Alkaline Environment and Its Effect on Whitening Lignocellulose and Homogenous Lignin Oxidation. Khimija rastitel’nogo syr’ja [Chemistry of plant raw material], 1998, no 1, pp. 45–50.
Yamamoto A., Rohumaa A., Hughes M., Vuorinen T., Rautkari L. Surface Modification of Birch Veneer by Peroxide Bleaching. Wood Science and Technology, 2017, vol. 1, iss. 51, pp. 85–95. DOI: https://doi.org/10.1007/s00226-016-0880-7
