Formation of Sectoral Residual Thermoplastic Tension Fields in Circular Saw Blade
DOI:
https://doi.org/10.37482/0536-1036-2023-4-146-154Keywords:
circular saw, thermoplastic tension, stability, focused thermal exposureAbstract
The efficiency of a stationary circular saw is determined by the performance and operational reliability of the woodcutting unit. During operation, the circular saw blade is exposed to a variety of complex loads and thermal conditions. The rigidity and stability of the saw blade determine its capacity to resist the perturbing cutting forces. The cutting compound itself is a thin disc made of steel with a hole in the middle that has a serrated cutting edge. It consists of three areas: peripheral, middle, and central. The stability of the saw blade is determined by the middle and peripheral parts. The increase in durability is achieved by plastic deformation to form the strip boundaries of the radial sections. These parts are treated by forging in both national and international practice. Normalization of loads on the blade in case of local mechanical contact with the working body is formed in the strip boundaries of the radial sections through the formation of places with plastic deformation of the metal, which rearrange the loads and place them in the radial direction. At the same time, countertension appears from the adjoining sections, leading to mutual “repulsion” of them and the creation of compressive tension that compensates for the forces of centrifugal acceleration, thermal heating of separate areas of the saw blade, external longitudinal and transverse bending tension that arise during wood processing. The combined interaction of all adjoining sections provides the tension and stability of the saw blade. The creation of the radial sections by forging has some significant disadvantages. Their elimination requires a fundamentally new approach, such as the formation of the residual stress sections in the saw blade by thermal exposure. It creates a normalized residual thermoplastic tension in the saw blade by a short-time (1–2 s) focused thermal influence on the strip boundaries of the radial sections. The results of the conducted research determined the boundaries of the sections for thermal treatment and the temperature range, which ensure the formation of normalized residual thermoplastic tension in the circular saw blade through concentrated pulsed heating of the strip edges of radial sections.
For citation: Melekhov V.I., Solovev I.I. Formation of Sectoral Residual Thermoplastic Tension Fields in Circular Saw Blade. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 4, pp. 146–154. (In Russ.). https://doi.org/10.37482/0536-1036-2023-4-146-154
Downloads
References
Биргер И.А. Остаточные напряжения. М.: Машгиз, 1963. 232 с. Birger I.A. Residual Tensions. Moscow, Gosudarstvennoye izdatel’stvo «Mashinostroyeniye» Publ., 1963. 232 p. (In Russ.).
Богатов А.А. Механические свойства и модели разрушения металлов. Екатеринбург: УГТУ-УПИ, 2002. 329 с. Bogatov A.A. Mechanical Properties and Models of Metal Destruction. Yekaterinburg, USTU-UPI Publ., 2002. 329 p. (In Russ.).
Богатов А.А. Остаточные напряжения и разрушение металла // Инновационные технологии в металлургии и машиностроении: материалы 6-й междунар. науч.-практ. конф. Уральская научно-педагогическая школа им. проф. А.Ф. Головина, Екатеринбург, 29 окт.–1 нояб. 2012 г. Екатеринбург: Урал. ун-т, 2013. С. 95–101. Bogatov A.A. Residual Tensions and Metal Destruction. Innovative Technologies in Metallurgy and Mechanical Engineering: Proceedings of the 6th International ScientificPractical Conference of Ural Scientific-Pedagogical School named after Professor A.F. Golovin, Yekaterinburg, 29 October – 1 November 2012. Yekaterinburg, Izdatel’stvo Ural’skogo universiteta Publ., 2013, pp. 95–101. (In Russ.).
Боровиков Е.М., Орлов Б.Ф. Термический способ подготовки круглых пил к работе // Изв. вузов. Лесн. журн. 1974. № 6. С. 90–94. Borovikov E.M., Orlov B.F. Thermal Treatment of Circular Saws. Lesnoy Zhurnal = Russian Forestry Journal,1974, no. 6, pp. 90–94. (In Russ.).
Бородин И.Н., Майер А.Е., Петров Ю.В., Груздков А.А. Максимум предела текучести при квазистатической и высокоскоростной пластической деформации металлов // Физика твердого тела. 2014. Т. 56, вып. 12. С. 2384–2393. Borodin I.N., Mayer A.E., Petrov Yu.V., Gruzdkov A.A. Maximum Yield Strength Under Quasi-Static and High-Speed Plastic Deformation of Metals. Solid State Physics, 2014, vol. 56, no. 12, pp. 2384–2393. (In Russ.). https://doi.org/10.1134/S1063783414120051
Мелехов В.И., Соловьев И.И. Создание термопластических напряжений в пильном диске круглой пилы // Изв. вузов. Лесн. журн. 2010. № 2. С. 87–91. Melekhov V.I., Solovyov I.I. Creation of Thermoplastic Tension in Circular Saw Blade. Lesnoy Zhurnal = Russian Forestry Journal, 2010, no. 2, pp. 87–91. (In Russ.). http://lesnoizhurnal.ru/upload/iblock/b08/b087c4466253da22ed3e19c778437576.pdf
Мелехов В.И., Соловьев И.И., Тюрикова Т.В., Пономарева Н.Г. Повышение устойчивости дереворежущих пил термопластическим воздействием на распределение остаточных напряжений в полотне // Изв. вузов. Лесн. журн. 2020. № 6. С. 172–181. Melekhov V.I., Solovyev I.I., Tyurikova T.V., Ponomareva N.G. Improving the Stability of Wood-Cutting Saws by Thermoplastic Action on the Distribution of Residual Stresses in The Blade. Lesnoy Zhurnal = Russian Forestry Journal, 2020, no. 6, pp. 172–181. (In Russ.). https://doi.org/10.37482/0536-1036-2020-6-172-181
Патент 2434952 С1 РФ, МПК C21D 9/24, H05B 6/02. Устройство для создания термопластических напряжений в пильном диске круглой пилы: № 2010117098/02: заявл. 29.04.2010: опубл. 27.11.2011 / И.И. Соловьев, В.И. Мелехов. Melekhov V.I., Solovyev I.I. Device for Creating Thermoplastic Stresses in Circular Saw Blade. Patent RF no. RU 2434952 С1, 2011. (In Russ.).
Патент 2684521 С1 РФ, МПК C21D 9/24. Устройство для создания термопластических нормированных напряжений в круглой пиле: № 2018121970: заявл. 15.06.2018: опубл. 09.04.2019 / В.И. Мелехов, И.И. Соловьев. Melekhov V.I., Solovyov I.I. Device for Creation Thermoplastic Normalized Stresses in Circular Saw Blade. Patent RF no. RU 2684521 С1, 2019. (In Russ.).
Поздеев А.А., Няшин Ю.И., Трусов П.В. Остаточные напряжения: теория и приложения: моногр. М.: Наука, 1982. 109 с. Pozdeyev A.A., Nyashin Yu.I., Trusov P.V. Residual Stresses: Theory and Applications: А Monograph. Moscow, Nauka Publ., 1982. 109 p. (In Russ.).
Прокофьев Г.Ф. Создание высокотехнологичных лесопильных станков: моногр. Архангельск, 2018. 157 с. Prokofiev G.F. Creation of High-Tech Sawmills: А Monograph. Arkhangelsk, Solti Publ., 2018. 157 p. (In Russ.).
Стахиев Ю.М. Устойчивость и колебания плоских круглых пил. М.: Лесн. пром-сть, 1977. 296 с. Stakhiyev Yu.M. Stability and Vibration of Flat Circular Saws. Moscow, Lesnaya promyshlennost’ Publ., 1977. 296 p. (In Russ.).
Стахиев Ю.М. Научно-технологические основы производства, подготовки и эксплуатации плоских круглых пил для распиловки древесины: автореф. дис. … д-ра техн. наук. Архангельск, 2002. 32 с. Stakhiyev Yu.M. Scientific and Technological Bases of Production, Setting-Up and Operation of Flat Circular Saws for Wood Sawing: Dr. Eng. Sci. Diss. Abs. Arkhangelsk, 2002. 32 p. (In Russ.).
Якунин Н.К. Подготовка круглых пил к работе. М.: Лесн. пром-сть, 1980. 151 с. Akunin N.K. Setting-Up of Circular Saws. Moscow, Lesnaya promyshlennost’ Publ., 1980. 151 p. (In Russ.).
Bathe K.J. Finite Element Procedures in Engineering Analysis. New Jersey, Prentice Hall Publ., 1982. 735 p.
Bayer R.J. Mechanical Wear Fundamentals and Testing, Revised and Expanded. New York, CRC Press Publ., 2004. 416 p. https://doi.org/10.1201/9780203021798
Calladine C.R. Theory of Shell Structures. Cambridge, Cambridge University Press Publ., 1983. 763 p. https://doi.org/10.1017/CBO9780511624278
Hughes T.J.R., Hinton E. Finite Element Methods for Plates and Shells: Elements Technology. Vol. 1. Swansea, Pineridge Press Publ., 1986. 315 p.
Meyers M.A., Chawla K.K. Mechanical Behavior of Materials. Cambridge, Cambridge University Press Publ., 2009. 856 p. https://doi.org/10.1017/CBO9780511810947
