Comparative Analysis of Packaging Cardboard Obtained from Different Types of Cellulose Fibrous Raw Materials

Authors

DOI:

https://doi.org/10.37482/0536-1036-2025-6-142-154

Keywords:

cotton stalk cardboard, linerboard, virgin fiber, waste paper fiber, non-wood raw materials, wood raw materials

Abstract

A comparative analysis of the properties of packaging cardboard types manufactured in laboratory conditions from cotton stalk cellulose with industrial samples of cardboard from recycled materials and high-yield semi-finished products produced at Russian paper mills has been presented in the article. The aim of the study has been to assess the possibility of using cotton waste as an additional or alternative raw material for the production of packaging cardboard, especially in cotton-producing countries. The use of cotton stalks as a raw material for the production of paper and cardboard not only solves the problem of agricultural waste, but also provides an opportunity to implement a circular economy model, according to which waste is recycled to produce high-margin materials. Samples of cardboard made from cotton stalk cellulose of 3 types from different manufacturers have been compared: linerboard made from primary fiber at the Arkhangelsk Pulp & Paper Mill; linerboard made from MS-5B waste paper at the Kamenskaya Paper & Board Mill and the “Mayak” Enterprise; linerboard made from eucalyptus waste paper at one of the Brazilian enterprises. To assess the structural characteristics of the samples, a microscopic analysis of the fiber has been carried out, which has made it possible to visualize the differences in the morphological structure of fibers of different nature. It has been established that the cellulose of cotton stalks is geometrically closer to that of eucalyptus waste paper fiber. The fiber length has been 0.75 mm, which is 40 % shorter than that of cardboard samples from the Kamenskaya Paper & Board Mill and the “Mayak” Enterprise and more than 2 times shorter than the average length of cellulose in the composition of cardboard from the Arkhangelsk Pulp & Paper Mill. The samples have been prepared for testing using standard methods in accordance with the requirements of GOST R 57207–2008. An analysis of the physical and mechanical characteristics of the ma terials, such as breaking length, bursting strength, etc., has been performed. Given the environmental and economic feasibility of recycling non-wood raw materials, the technology for producing cardboard from cotton stalks represents an important step towards creating more sustainable and competitive materials.

Downloads

Download data is not yet available.

Author Biographies

Ismoil S. Sodikov, Northern (Arctic) Federal University named after M.V. Lomonosov

Postgraduate Student; ResearcherID: HKV-1291-2023

Natalia V. Shcherbak, Northern (Arctic) Federal University named after M.V. Lomonosov

Candidate of Engineering, Assoc. Prof.; ResearcherID: ABE-4156-2020

References

Васильева Е.Р. Современное состояние мирового рынка хлопка и перспективы развития хлопководства в Узбекистане // Гуманитарная миссия обществознания на пороге нового индустриального общества: сб. ст. Междунар. науч. форума. Уфа: Ин-т стратегич. исслед. Респ. Башкортостан, 2020. С. 502–506. Vasilyeva E.R. Current State of the World Cotton Market and Prospects for the Development of Cotton Production in Uzbekistan. Humanitarian Mission of Social Science on the Threshold of a New Industrial Society: Collection of Articles from the International Scientific Forum. Ufa: Institute for Strategic Studies of the Republic of Bashkortostan, 2020, pp. 502–506. (In Russ.).

Гурьев А.В., Дубовый В.К., Комаров В.И., Казаков Я.В. Лабораторный практикум по технологии бумаги и картона. СПб.: Политехн. ун-т, 2006. 229 с. Gur’ev A.V., Dubovyj V.K., Komarov V.I., Kazakov Ya.V. Laboratory Practical Training on Paper and Cardboard Technology. St. Petersburg, Polytechnic University Publ., 2006. 229 p. (In Russ.).

Джанбекова Л.Р. Особенности волокнистого сырья, используемого в производстве картонов // Вестн. Казанск. технол. ун-та. 2010. № 11. С. 562–564. Dzhanbekova L.R. Features of Fibrous Raw Materials Used in Cardboard Production. Vestnik Kazanskogo tekhnologicheskogo universiteta = Herald of Technological University, 2010, no. 11, pp. 562–564. (In Russ.).

Отраслевой информационный портал. Режим доступа: https://sbo-paper.ru/news/archive_rus/5448/ (дата обращения: 28.10.25). Industry Information Portal. Available at: https://sbo-paper.ru/news/archive_rus/5448/ (accessed 28.10.25). (In Russ.).

Содиков И.С., Щербак Н.В. Получение волокнистого полуфабриката из стеблей хлопчатника для упаковочных видов бумаг // Проблемы механики целлюлозно-бумажных материалов: материалы VII Междунар. науч.-техн. конф. им. проф. В.И. Комарова. Архангельск: САФУ, 2023. С. 286–289. Sodikov I.S., Shcherbak N.V. Production of Fibrous Semi-Finished Products from Cotton Stems for Packaging Paper. Problemy mekhaniki tsellulozno-bumazhnykh materialov = The Issues in Mechanics of Pulp-and-Paper Materials: Proceedings of the VII International Scientific and Technical Conference named after Prof. V.I. Komarov. Arkhangelsk, Northern (Arctic) Federal University, 2023, pp. 286–289. (In Russ.).

Чавчавадзе Е.С., Брянцева З.Е., Гончарова Е.В., Нехлюдова М.В., Горбачева Г.Н., Коржицкая З.А. Атлас древесины и волокон для бумаги / ЦНИИ бумаги; под ред. Е.С. Чавчавадзе. М.: Ключ, 1992. 329 с. Chavchavadze E.S., Bryantseva Z.E., Goncharova E.V., Nekhlyudova M.V., Gorbacheva G.N., Korzhitskaya Z.A. Atlas of Wood and Paper Fibers. Central Research Institute of Paper, ed. by E.S. Chavchavadze. Moscow, Klyuch Publ., 1992. 329 p. (In Russ.).

Шлейхер А.И., Шафрин А.Н., Соколов А.Ф., Нармухамедов Н.Н., Нерозин А.Е., Казиев М.З., Панфилова Л.А., Колдаев А.А., Черникова А.Н., Автономов А.И., Автономов В.А. Хлопководство. 2-е изд., перераб. и доп. М.: Колос, 1983. 334 с. Shleikher A.I., Shafrin A.N., Sokolov A.F., Narmukhamedov N.N., Nerozin A.E., Kaziev M.Z., Panfilova L.A., Koldaev A.A., Chernikova A,N., Avtonomov A.I., Avtonomov V.A. Cotton Growing: 2nd ed., revised and enlarged. Moscow: Kolos Publ., 1983. 334 p. (In Russ.).

Biyada S., Merzouki M., Urbonavičius J. New Resources for Sustainable Thermal Insulation Using Textile and Agricultural Waste in a New Circular Economy Approach. Processes, 2023, vol. 11, no. 9, art. no. 2683. https://doi.org/10.3390/pr11092683

Ding Y., Pang Z., Lan K., Yao Y., Panzarasa G., Xu L., Ricco M.L., Rammer D.R., Zhu J.Y., Hu M., Pan X., Li T., Burgert I., Hu L. Emerging Engineered Wood for Building Applications. Chemical Reviews, 2023, vol. 123, iss. 5, pp. 1843–1888. https://doi.org/10.1021/acs.chemrev.2c00450

Duque-Acevedo M., Lancellotti I., Andreola F., Barbieri L., Belmonte-Ureña L.J., Camacho-Ferre F. Management of Agricultural Waste Biomass as Raw Material for the Construction Sector: an Analysis of Sustainable and Circular Alternatives. Environmental Sciences Europe, 2022, vol. 34, art. no. 70. https://doi.org/10.1186/s12302-022-00655-7

Eugenio M.E., Ibarra D., Martín-Sampedro R., Espinosa E., Bascón I., Rodríguez A. Alternative Raw Materials for Pulp and Paper Production in the Concept of a Lignocellulosic Biorefinery. Cellulose. IntechOpen Publ., 2019, pp. 1–26. https://doi.org/10.5772/intechopen.90041

Fahmy Y., Fahmy T.Y.A., Mobarak F., El-Sakhawy M., Fadl M.H. Agricultural Residues (Wastes) for Manufacture of Paper, Board, and Miscellaneous Products: Background Overview and Future Prospects. International Journal of ChemTech Research, 2017, vol. 10, no. 2, pp. 424–448.

Ibrahim R.A., Inan H., Fahim I.S. A Comparative Cradle-to-Gate Life Cycle Assessment of Three Cotton Stalk Waste Sustainable Applications. Scientific Reports, 2023, vol. 13, art. no. 20781. https://doi.org/10.1038/s41598-023-47817-y

Jiménez L., Rodríguez A. Valorization of Agricultural Residues by Fractionation of Their Components. The Open Agriculture Journal, 2010, vol. 4, pp. 125–134. https://doi.org/10.2174/1874331501004010125

Kanipandian N., Thirumurugan R. A Feasible Approach to Phyto-Mediated Synthesis of Silver Nanoparticles Using Industrial Crop Gossypium hirsutum (Cotton) Extract as Stabilizing Agent and Assessment of its in vitro Biomedical Potential. Industrial Crops and Products, 2014, vol. 55, pp. 1–10. https://doi.org/10.1016/j.indcrop.2014.01.042

Li H., Sun H., He Z. Achnatherum inebrians Straw as a Potential Raw Material for Pulp and Paper Production. Journal of Cleaner Production, 2015, vol. 101, pp. 193–196. https://doi.org/10.1016/j.jclepro.2015.03.061

Maxwell J.M., Gordon S.G., Huson M.G. Internal Structure of Mature and Immature Cotton Fibers Revealed by Scanning Probe Microscopy. Textile Research Journal, 2003, vol. 73, iss. 11, pp. 1005–1012. https://doi.org/10.1177/004051750307301111

Moore G. Non Wood Fiber Applications in Papermaking. UK, Surrey, Pira International, 1996. 208 p.

Pandirwar A.P., Khadatkar A., Mehta C.R., Majumdar G., Idapuganti R., Mageshwaran V., Shirale A.O. Technological Advancement in Harvesting of Cotton Stalks to Establish Sustainable Raw Material Supply Chain for Industrial Applications: a Review. BioEnergy Research, 2023, vol. 16, pp. 741–760. https://doi.org/10.1007/s12155-022-10520-3

Press Release 1: Fibe Accelerates Sustainable Fashion Possibilities with Investment Funding and Potato Yarn Breakthrough. Fibe. Available at: https://www.fibe.uk/media (accessed 31.10.24).

Rehman A., Farooq M. Morphology, Physiology and Ecology of Cotton. Cotton Production, 2019, chapt. 2, pp. 23–46. https://doi.org/10.1002/9781119385523.ch2

Rizal S., Abdul Khalil H.P.S., Oyekanmi A.A., Gideon O.N., Abdullah C.K., Yahya E.B., Alfatah T., Sabaruddin F.A., Rahman A.A. Cotton Wastes Functionalized Biomaterials from Micro to Nano: A Cleaner Approach for a Sustainable Environmental Application. Polymers, 2021, vol. 13, no. 7, art. no. 1006. https://doi.org/10.3390/polym13071006

Savio L., Pennacchio R., Patrucco A., Manni V., Bosia D. Natural Fibre Insulation Materials: Use of Textile and Agri-Food Waste in a Circular Economy Perspective. Materials Circular Economy, 2022, vol. 4, art. no. 6. https://doi.org/10.1007/s42824-021-00043-1

Sigoillot C., Camarero S., Vidal T., Record E., Asther M., Pérez-Boada M., Martínez M.J., Sigoillot J.-C., Asther M., Colom J.F., Martínez A.T. Comparison of Different Fungal Enzymes for Bleaching High-Quality Paper Pulps. Journal of Biotechnology, 2005, vol. 115, iss. 4, pp. 333–343. https://doi.org/10.1016/j.jbiotec.2004.09.006

Soni B., Hassan E.B., Mahmoud B. Chemical Isolation and Characterization of Different Cellulose Nanofibers from Cotton Stalks. Carbohydrate Polymers, 2015, vol. 134, pp. 581–589. https://doi.org/10.1016/j.carbpol.2015.08.031

Suomela J., Viljanen M., Svedström K., Wright K., Lipkin S. Research Methods for Heritage Cotton Fibres: Case Studies from Archaeological and Historical Finds in a Finnish Context. Heritage Science, 2023, vol. 11, art. no. 175. https://doi.org/10.1186/s40494-023-01022-2

Published

2025-12-19

How to Cite

Sodikov И., and Shcherbak Н. “Comparative Analysis of Packaging Cardboard Obtained from Different Types of Cellulose Fibrous Raw Materials”. Lesnoy Zhurnal (Forestry Journal), no. 6, Dec. 2025, pp. 142-54, doi:10.37482/0536-1036-2025-6-142-154.

Issue

Section

TECHNOLOGY OF WOOD CHEMICAL PROCESSING AND PRODUCTION OF WOOD-POLYMER COMPOSITES