Aerogels Based on Silicon Dioxide and Lignosulfonate

Authors

DOI:

https://doi.org/10.37482/0536-1036-2024-6-184-194

Keywords:

biopolymer, sodium lignosulfonate, silicon dioxide, aerogel, textural characteristics

Abstract

Currently, there is considerable interest in the synthesis of aerogels based on natural polymers. The use of biopolymers is due to their physical and chemical properties, availability, non-toxicity, and the renewable nature of the raw materials needed for their production. These characteristics are possessed by lignosulfonates – sulfonates of the natural biopolymer lignin, formed as a result of sulfite (bisulfite) delignification of wood. Composite aerogel materials attract special attention by combining the properties of both organic and inorganic components. The incorporation of biopolymers into the matrix of nanocomposite aerogels can improve their consumer properties. The aim of this work has been the synthesis of aerogels based on silicon dioxide and sodium lignosulfonate, the study of gelation in the “sodium lignosulfonate – silicon dioxide” system and the assessment of the influence of synthesis conditions on the formation of the structure of aerogel materials based on them. Hydrogels based on components of various chemical natures of sodium lignosulfonate and silicon dioxide, have been obtained by sol-gel synthesis. It has been shown that strong elastic gels are formed at silicon dioxide concentrations above 175 g/l. It has been established that modification of sodium lignosulfonates with silicon dioxide leads to particle aggregation and an increase in their size. Aerogel materials based on sodium lignosulfonate and silicon dioxide, obtained at different molar ratios of componets (the mass fraction of lignosulfonate in the system), have a developed inner surface, the specific surface area is 250...452 m2/g, the total pore volume varies from 0.84 to 2.00 cm3/g. It has been shown that with an increase in the mass fraction of lignosulfonate in the system, the textural characteristics of synthesized composite aerogel materials change: an increase in the specific surface area and pore volume of the obtained materials is observed. With a sodium lignosulfonate content of 6…25 % in the system, the specific surface area of composite aerogels is 250…325 m2/g; with an increase in the proportion of sodium lignosulfonate in the system to 33...50 %, it reaches 357…452 m2/g. The synthesized materials can be used as sorbents, sensor devices, and catalyst carriers.

Downloads

Download data is not yet available.

Author Biographies

Olga S. Brovko, N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences

Candidate of Chemistry, Leading Research Scientist, Assoc. Prof.; ResearcherID: AAF-5387-2019

Marina E. Nechaeva, N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences

Junior Research Scientist, Postgraduate Student; ResearcherID: AAL-7068-2020

Artem D. Ivakhnov, N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences; Northern (Arctic) Federal University named after M.V. Lomonosov

Candidate of Chemistry, Senior Research Scientist; ResearcherID: U-4822-2019

Irina A. Palamarchuk, N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences

Candidate of Chemistry, Senior Research Scientist; ResearcherID: AAF-5454-2019

Natalia A. Gorshkova, N. Laverov Federal Center for Integrated Arctic Research of the Ural Branch of the Russian Academy of Sciences

Candidate of Chemistry, Senior Research Scientist; ResearcherID: G-2949-2018

Nikolay I. Bogdanovich, Northern (Arctic) Federal University named after M.V. Lomonosov

Doctor of Engineering, Prof.; ResearcherID: A-4662-2013

References

Арапова О.В., Чистяков А.В., Цодиков М.В., Моисеев И.И. Лигнин – возобновляемый ресурс углеводородных продуктов и энергоносителей (обзор) // Нефтехимия. 2020. Т. 60, № 3. С. 251–269. Arapova O.V., Chistyakov A.V., Tsodikov M.V., Moiseev I.I. Lignin – a Renewable Resource of Hydrocarbon Products and Energy Carriers (Review). Neftekhimiya = Petroleum Chemistry, 2020, vol. 60, no. 3, pp. 251–269. (In Russ.). https://doi.org/10.31857/S0028242120030041

Вишнякова А.П., Бровко О.С. Применение ультрафильтрации для очистки, концентрирования и фракционирования лигносульфонатов сульфитного щелока // Экология и пром-сть России. 2009. № 8. С. 37–39. Vishnyakova A.P., Brovko O.S. Application of Ultrafiltration for Purifcation, Concentration and Fractionation of Lignosulphonates of Sulfite Liquor. Ekologiya i promyshlennost’ Rossii = Ecology and Industry of Russia, 2009, no. 8, pp. 37–39. (In Russ.).

Паламарчук И.А., Бровко О.С., Бойцова Т.А., Вишнякова А.П., Макаревич Н.А. Влияние ионной силы раствора на комлексообразование сульфопроизводных биополимера лигнина и хитозана // Химия растит. сырья. 2011. № 2. С. 57–64. Palamarchuk I.A., Brovko O.S., Bojtsova T.A., Vishnyakova A.P., Makarevich N.A. The Ionic Strength Effect of a Solution on the Complex Formation of Sulfonated Biopolymers of Lignin and Chitosan. Khimija Rastitel’nogo Syr’ja, 2011, no. 2, pp. 57–64. (In Russ.).

Плахин В.А., Хабаров Ю.Г., Вешняков В.А. Синтез коллоидного серебра с использованием лигносульфонатов // Изв. вузов. Лесн. журн. 2021. № 6. С. 184–195. Plakhin V.A., Khabarov Yu.G., Veshnyakov V.A. Synthesis of Colloidal Silver Using Lignosulfonates. Lesnoy Zhurnal = Russian Forestry Journal, 2021, no. 6, pp. 184–195. (In Russ.). https://doi.org/10.37482/0536-1036-2021-6-184-195

Шиндряев А.В., Лебедев А.Е., Меньшутина Н.В. Получение аэрогелей диоксида кремния с модификацией внутренней поверхности // Вестн. ТГТУ. 2023. Т. 29, № 3. С. 463–473. Shindryaev A.V., Lebedev A.E., Menshutina N.V. Preparing Silicon Dioxide Aerogels with Modification of the Inner Surface. Vestnik Tambovskogo gosudarstvennogo tekhnicheskogo universiteta = Transactions of the Tambov State Technical University, 2023, vol. 29, no. 3, pp. 463–473. (In Russ.).

Babiarczuk B., Lewandowski D., Kierzek K., Detyna J., Jones W., Kaleta J., Krzak J. Mechanical Properties of Silica Aerogels Controlled by Synthesis Parameters. Journal of Non-Crystalline Solids, 2023, vol. 606, art. no. 122171. https://doi.org/10.1016/j.jnoncrysol.2023.122171

Brovko O., Palamarchuk I., Bogdanovich N., Ivakhnov А., Chukhchin D., Belousova M., Arkhilin M., Gorshkova N. Composite Aerogel Materials Based on Lignosulfonates and Silica: Synthesis, Structure, Properties. Materials Chemistry and Physics, 2021, vol. 269, art. no. 124768. https://doi.org/10.1016/j.matchemphys.2021.124768

Brovko O.S., Bogolitsyn K.G., Palamarchuk I.A., Gorshkova N.A., Bogdanovich N.I., Ivakhnov A.D., Belousova M.E. Preparation of Aerogel Composite Materials Based on Lignosulfonates and Silica. Russian Journal of Physical Chemistry B, 2022, vol. 16, pp. 1204–1207. https://doi.org/10.1134/S1990793122070041

Budtova T., Aguilera D.A., Beluns S., Berglund L., Chartier C., Espinosa E., Gaidukovs S., Klimek-Kopyra A., Kmita A., Lachowicz D., Liebner F., Platnieks O., Rodríguez A., Navarro L.K.T., Zou F., Buwalda S.J. Biorefinery Approach for Aerogels. Polymers, 2020, vol. 12, no. 12, art. no. 2779. https://doi.org/10.3390/polym12122779

Christina K., Subbiah K., Arulraj P., Krishnan S.K., Sathishkumar P. A Sustainable and Eco-Friendly Approach for Environmental and Energy Management Using Biopolymers Chitosan, Lignin and Cellulose – A Review. International Journal of Biological Macromolecules, 2024, vol. 257, part 2, art. no. 128550. https://doi.org/10.1016/j.ijbiomac.2023.128550

Jesionowski T., Klapiszewski Ł., Milczarek G. Kraft Lignin and Silica as Precursors of Advanced Composite Materials and Electroactive Blends. Journal of Materials Science, 2014, vol. 49, pp. 1376–1385. https://doi.org/10.1007/s10853-013-7822-7

Khalil H.P.S.A., Yahya E.B., Jummaat F., Adnan A.S., Olaiya N.G., Rizal S., Abdullah C.K., Pasquini D., Thomas S. Biopolymers Based Aerogels: A Review on Revolutionary Solutions for Smart Therapeutics Delivery. Progress in Materials Science, 2023, vol. 131, art. no. 101014. https://doi.org/10.1016/j.pmatsci.2022.101014

Khan N.R., Sharmin T., Rashid A.B. Exploring the Versatility of Aerogels: Broad Applications in Biomedical Engineering, Astronautics, Energy Storage, Biosensing, and Current Progress. Heliyon, 2024, vol. 10, iss. 1, art. no. e23102. https://doi.org/10.1016/j.heliyon.2023.e23102

Klapiszewski L., Zietek J., Ciesielczyk F., Siwinska-Stefanska K., Jesionowski T. Magnesium Silicate Conjugated with Calcium Lignosulfonate: In situ Synthesis and Comprehensive Physicochemical Evaluations. Physicochemical Problems of Mineral Processing, 2018, vol. 54(3), pp. 793–802. https://doi.org/10.5277/ppmp1875

Matinfar M., Nychka J.A. A review of Sodium Silicate Solutions: Structure, Gelation, and Syneresis. Advances in Colloid and Interface Science, 2023, vol. 322, art. no. 103036. https://doi.org/10.1016/j.cis.2023.103036

Meti P., Mahadik D.B., Lee K.-Y., Wang Q., Kanamori K., Gong Y.-D., Park H.-H. Overview of Organic–Inorganic Hybrid Silica Aerogels: Progress and Perspectives. Materials & Design, 2022, vol. 222, art. no. 111091. https://doi.org/10.1016/j.matdes.2022.111091

Minju N., Balagopal N.N., Savithri S. Sodium Silicate-Derived Aerogels: Effect of Processing Parameters on Their Applications. RSC Advances, 2021, vol. 11, pp. 15301–15322. https://doi.org/10.1039/D0RA09793D

Modrzejewska-Sikorska A., Konował E., Klapiszewski Ł., Nowaczyk G., Jurga S., Jesionowski T., Milczarek G. Lignosulfonate-Stabilized Selenium Nanoparticles and Their Deposition on Spherical Silica. International Journal of Biological Macromolecules, 2017, vol. 103, pp. 403–408. https://doi.org/10.1016/j.ijbiomac.2017.05.083

Patel R., Dhar P., Babaei-Ghazvini A., Dafchahi M.N., Acharya B. Transforming Lignin into Renewable Fuels, Chemicals, and Materials: A Review. Bioresource Technology Reports, 2023, vol. 22, art. no. 101463. https://doi.org/10.1016/j.biteb.2023.101463

Rafieian F., Dufresne A., Askari G., Rezaei A., Seyedhosseini-Ghaheh H., Jafari S.M. Aerogels as Novel Ingredients: Production, Properties and Applications in Medical, Food and Environmental Sectors. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, vol. 687, art. no. 133410. https://doi.org/10.1016/j.colsurfa.2024.133410

Ruwoldt J. A Critical Review of the Physicochemical Properties of Lignosulfonates: Chemical Structure and Behavior in Aqueous Solution, at Surfaces and Interfaces. Surfaces, 2020, vol. 3, no. 4, pp. 622–648. https://doi.org/10.3390/surfaces3040042

Schneider W.D.H., Dillon A.J.P., Camassola M. Lignin Nanoparticles Enter the Scene: A Promising Versatile Green Tool for Multiple Applications. Biotechnology Advances, 2021, vol. 47, art. no. 107685. https://doi.org/10.1016/j.biotechadv.2020.107685

Soorbaghi F.P., Isanejad M., Salatin S., Ghorbani M., Jafari S., Derakhshankhah H. Bioaerogels: Synthesis Approaches, Cellular Uptake, and the Biomedical Applications. Biomedicine & Pharmacotherapy, 2019, vol. 111, pp. 964–975. https://doi.org/10.1016/j.biopha.2019.01.014

Vera M., Bischof S., Rivas B.L., Weber H., Mahler A.K., Kozich M., Guebitz G.M., Nyanhongo G.S. Biosynthesis of Highly Flexible Lignosulfonate–Starch Based Materials. European Polymer Journal, 2023, vol. 198, art. no. 112392. https://doi.org/10.1016/j.eurpolymj.2023.112392

Xiong W., Yang D., Alam M.A., Xu J., Li Y., Wang H., Qiu X. Structural Regulation of Lignin/Silica Nanocomposites by Altering the Content of Quaternary Ammonium Groups Grafted into Softwood Kraft Lignin. Industrial Crops and Products, 2020, vol. 144, art. no. 112039. https://doi.org/10.1016/j.indcrop.2019.112039

Zakis G.F. Functional Analysis of Lignins and Their Derivatives. Riga, Zinatne, 1987. 230 p.

Zhang Z., Chen Y., Wang D., Yu D., Wu C. Lignin-Based Adsorbents for Heavy Metals. Industrial Crops & Products, 2023, vol. 193, art. no. 116119. https://doi.org/10.1016/j.indcrop.2022.116119

Published

2024-12-18

How to Cite

Brovko О., Nechaeva М., Ivakhnov А., Palamarchuk И., Gorshkova Н., and Bogdanovich Н. “Aerogels Based on Silicon Dioxide and Lignosulfonate”. Lesnoy Zhurnal (Forestry Journal), no. 6, Dec. 2024, pp. 184-9, doi:10.37482/0536-1036-2024-6-184-194.

Issue

Section

TECHNOLOGY OF WOOD CHEMICAL PROCESSING AND PRODUCTION OF WOOD-POLYMER COMPOSITES

Most read articles by the same author(s)